POWERMASTER “One Revolution” Internal Tube
Cutter pierces and cuts off non-ferrous and thin
walled ferrous tubes in one revolution.
This “One Revolution” Internal Tube Cutter
is designed for hand operation using a ratchet
handle.
The Cutter Tool Bit operates on an eccentric
principle. The Tube Cutter is entered in the tube
with the Tool Bit in c lo se d position , ratchet
is applied and turned in clockwise direction. The
Tool Bit contacts the tube during the One
Revolution and pierces the tube wall and as
turning is continued the Tool Bit shears through
the tube along its circumference. This Cutter is
fitted with an adjustable collar enabling it to
reach into tubes at various distances and they are
available in optional increments of 2”(50.8mm).
Standard adjustable reach is 6”(152.4mm). ”A”
reach = 8”(203.2). “B” reach = 10”(254.0mm).
“C” reach = 12”(304.8mm) etc.
