Powermaster spring balancers, load balancers, tool balancers

 

 

Home : Tube Tools Division : Tube Removal Tools : Tube Removal Tools

 

Tube Removal Tools


Tube Wall Reducer

Features of Tube Wall Reducer - Tube Removal Tools
  • Used to ‘thin’ the walls of heavy gauge tubes as a step in their removal from
    tube sheet.
  • Suffix model number with tube gauge when ordering. Example for 3/4”O.D.
    16G, model number will be WR-750-16.
  • Wall reducers available for mm tube sizes also. Please enquire.
  • Wall reducers are suited for tube sheets up to 5” thick. Longer reaches are available.
Sizes Available of these Tube Removal Tools 3/8" O.D. TO 4" O.D.
Models Available of these Tube Removal Tools WR-375 TO WR-1500
SH-1750 TO SH-4000

Knockout Tools
Tube Drift / Knockout Tools

Features of Tube Drift / Knockout Tools - Tube Removal Tools
  • Tube Drift Tools / Knockout Tool can be used with pneumatic chipping hammer to knock out tubes / tube
    stubs from tube sheet.
  • These Knockout Tools are available in 01 and 06 shanks as standard. 15 (Jumbo) shank available
    on request.
  • Suffix model number with tube gauge and shank when ordering. Example
    for 3/4” O.D. 16G, 06 shank, model number will be KT-750-16-06.
  • Tube Drift Tools / Knockout Tools are available for mm tube sizes also. Please enquire.
  • Standard reach of this knowckout tool is 6”. Longer reaches are available.
Sizes Available of Tube Drift / Knockout Tools 3/8" O.D. TO 4" O.D.
Models Available of Tube Drift / Knockout Tools KT-375 TO KT-4000


Collapsing Tool

Features of Collpasing Tool- Tube Removal Tools
  • Used to collapse tube and drive out collapsed tube from tube sheet with a
    chipping hammer.
  • Recommended for use on 16G and thinner tubes.
  • Available on 01 and 06 shanks as standard.
  • Suffix model number with shank number when ordering. Example for
    3/4” O.D. 16G, 06 shank, model number will be CT-750-06.
  • Collapsing tools are available for mm tube sizes and larger tube sizes. Please enquire.
Sizes Available of these Tube Removal Tools 3/8" O.D. TO 2 1/2" O.D.
Models Available of these Tube Removal Tools CT-375 TO CT-2500

 


© Copyright 2003. Powermaster Engineers Pvt. Ltd.